Machining Center - Horizontal
MORI SEIKI NH 6300 DCG APC 6
- Stock number:
- Year / Condition:
- Control unit:
- CNC (MSX 711 MAPPS 3 (Fanuc 31iA5))
- Country of origin:
- Freight basis:
- Ex site
- Item location:
- Delivery time:
Picture / documents / videos
- 900 mm
- 800 mm
- 980 mm
- MSX 711 MAPPS 3 (Fanuc 31iA5)
- numbers of pallets:
- pallet size::
- 630 x 630 mm
- max. workpiece diameter on pallets:
- 1000 mm
- workpiece - installed height:
- 1300 mm
- max. workpiece weight:
- 1200 kg
- spindle drive:
- 30/25 kW
- spindle speed::
- 10000 1/min
- max. torque on the spindle:
- 600 Nm
- Table sensor for tool setting and auto-measuring:
- tool magazin::
- 240 HSK-A 100
- diameter of tools max.:
- 110 mm
- Tool diameter with no neighbouring tools:
- 320 mm
- max. tool length:
- 630 mm
- max. tool weight:
- 30 kg
- rapid travel x/y/z:
- 50.000 mm/min
- total power requirement:
- 77,6 kVA
- weight of the machine ca.:
- 21 t
- dimensions of the machine ca.:
- 5,64 x 3,71 x 3,27 m
- Registrered programs:
- chip conveyor
- spindle oil cooler
- Load monitor
- Coolant through milling spindle 50 bar
- Coolant gun
- Cylinder interpolation
- 2 MB
- Rotoclear window
- Renishaw probe (spindle):
- OMP 60
- Air Filter
- Tool breakage control in magazine
- Expansion by 48 work piece offsets
The used machine Mori Seiki NH 6300 DCG APC 6 is a horizontal machining center with a 6 pallet pool and the MSX 711 MAPPS 3 (Fanuc 31iA5) control.
The x-travel is 900mm, the y-travel 800mm and the z-travel 980mm.
The B-axis is fully integrated (360.000 x 0,001°).
The spindle drive has an output of 30/25kW, the max. spindle speed is 10000 RPM and the max. torque on the spindle is 600 Nm.
The rapid travel x/y/z is 50.000mm/min
The pallet size is 630 x 630mm.
The max. work piece diameter on pallets is 1000mm
work piece - installed height 1300mm while the max. work piece weight is 1200kg.
The tool magazine is a rack type for 240 tool holders HSK-A 100.
Table sensor for tool setting and auto-measuring (Metrol) is integrated.
The max. tool-dia. is 110mm and 320mm with no neighboring tools in the magazine, the max. tool length can be 630mm while the max. tool weight is 30kg.
The machine comes with a chip conveyor, a coolant Gun and spindle oil cooler. Coolant through milling spindle has got a pressure of 50 bar. Instead of coolant, air can be blown trough the spindle.
Registered programs 1000
A Load monitor for cutting force monitoring is integrated
Cylinder interpolation and an expansion by 48 work piece offsets is installed.
The size of the Memory is 2 MB
A Rotoclear window is integrated in the workspace window. The machine comes with a Renishaw probe (spindle) OMP 60 and an Air Filter.
Probe for tool breakage and length measuring (magazine) is integrated.
The total power requirement of the machine is 77,6kVA
The machine has a weight of about 21t.
The dimensions of the machine are LxWxH 5,7 x 6 x 3,27m
Machine is in excellent condition.
Additional pallets and HSK-A 100 tool holders can be acquired at extra cost.