Milling machines - Planer-Type Milling M/C - Double Column - CORREA FP 40

Planer-Type Milling M/C - Double Column

CORREA FP 40

Stock number:
1118-1571 
Year / Condition:
2007 
Control unit:
CNC (HEIDENHAIN iTNC 530)
Country of origin:
SPANIEN 
Freight basis:
EXW 
Item location:
ex stock 
Delivery time:
short-term 

Picture / documents / videos

Technical specs

Details

x-travel:
4.000 mm
y-travel:
3.000 mm
z-travel:
1.000 mm
control:
HEIDENHAIN iTNC 530 
max./min distance spindle nose/table :
1.500/500 mm
clamping table:
4.500 x 2.000 mm
T-slots:
22 H8 
max. workpiece weight:
10.000 kg
distance between columns:
2.500 mm
feed rate X-axis:
2-15.000 mm/min
feed rate Y- und Z-axis, stepless:
2-12.000 mm/min
torque of the drives:
37 Nm
ball screws::
longitudinal (X)-axis, diameter/pitch:
63/12 mm
lateral (Y)-axis, diameter/pitch:
50/10 mm
vertical (Z)-axis, diameter/pich:
63/10 mm
working spindle with automatic milling head UAD::
capacity at 100% load:
30 kW
transmission ratio:
turning speed range - stepless:
40-5.000 U/min
tool taper:
SK 50 
Pull stud:
DIN 69872 Form A 
Milling head tilting in both levels:
0,1 °
autom. tool clamping:
18.000 N
tool places:
60 
diameter of tools max.:
200 mm
125 mm
workpiece length:
400 mm
workpiece weight max.:
25 kg
Changing positions:
vertical/horizontal 
weight of the machine ca.:
35,5 t
dimensions of the machine ca.:
11 x 6,7 x 5,4 m
44 kw
voltage:
400 V
operating frequency:
50 Hz

Description

CNC-control HEIDENHAIN iTNC 530
including digital drive control, hard disk memory, 15" TFT color screen,
6 GB hard disk space
Programs
Standard drilling and milling cycles, deep drilling, tapping with and without floating tap holder, milling of grooves, rectangular and circular pockets, rectangular and circular journals, boring,
drill milling (helical path), off-line drilling, drilling patterns, head swiveling, countersinking,
Shifting and/or rotating the coordinate system, mirroring, scaling factor also axis-specific,
Tool Center Point Management TCPM, linear interpolation, circular interpolation, tilting the working plane, helices, circular interpolation in space with tilted working plane
Memory and interface
Central tool memory for any number of tools, also with variable space coding, return to contour, touch probe cycles for measuring and zero point determination, data interface V24/RS-232-C and V11/RS-422, data transmission speed up to max. 115,200 baud, Fast Ethernet interface (100 Mbaud), remote diagnosis via Ethernet card possible
Guides, drive and measuring systems
•All axis drives with digital servo motors, manufacturer SIEMENS
•Direct measuring systems for X, Y and Z Axes, manufacturer HEIDENHAIN
•X-, Y- and Z-axis guidance using high-precision linear guides for maximum precision and dynamics
•Precision ball screws with preloaded nuts in X-, Y- and Z-axis


Chip conveyor
•2 chip conveyors mounted lengthwise between machine stand and clamping table
•Discharge height approx. 1070mm
•All chip conveyors as hinged belt conveyors


Coolant system
•Coolant outlet at milling head via shower rim 25 l/min, 3 bar.
•Tank capacity ca. 300 l
•Internal coolant supply 40 l/min 17 bar
•Coolant filtration via MAHLE automatic centrifuge filter (fineness 0.05 mm)
Equipment / Accessories
•Machine bed, stand, milling slide and vertical slide in pearlitic cast iron GG-30 with a hardness of 220 HB are generously dimensioned and ribbed
•Automatic indexing milling head UAD with 0.1° pitch in both planes
•2-stage automatic gearbox with recirculating oil lubrication Oil cooling unit for cooling the main spindle gear unit
•spindle drive 30 kW, make SIEMENS
•Spindle speed max. 5.000 min-1
•Axis drives by means of precision ball screws and digital servo motors
•Prepared for M&H 20.00 touch probe with radio transmission (touch probe missing)
•CNC control HEIDENHAIN iTNC 530 incl. digital drive technology
•Portable electronic handwheel HEIDENHAIN HR 410 with 3 m spiral cable
•Pivoting control panel for machine operation
•Automatic tool changer with 60 magazine positions, changing positions vertically + horizontally
•Coolant system with external shower rim and internal coolant supply through the spindle
•2 chip conveyors left and right of the clamping table
•IKO - Linear guides in the X-axis, sliding guides made of hardened steel strips and plastic-coated counter guides in the Y- and Z-axis
•Precision ball screws with pre-tapped double nuts in all axes
•Direct measuring system in all axes make HEIDENHAIN
•Hydraulic weight compensation in the vertical axis
•Telescopic cover of the X-axis
•Bellows cover of the Y-axis
•Splash guard cladding of the working area on 4 sides. The sliding door at the front of the machine is operated manually. The door on the side of the tool changer opens and closes automatically. In X - direction the working area is closed by a swiveling PVC curtain. Safety fencing for the area of the tool- and magazine with a secured access door.
•Air conditioning for electrical cabinet
•Approx. operating hours: control 18.260 h, machine 20.265 h, read off
program run 15,000 h estimated

Contact seller

FLECKENSTEIN Werkzeugmaschinen GmbH

FLECKENSTEIN Werkzeugmaschinen GmbH

Sommerweg 1563831 Wiesen Phone: +49 (0)609697060Fax: +49 (0)6096970620 E-Mail: fleckenstein@fleckenstein-machine.comwww.fleckenstein-machine.com

 Google Maps

Further machines of this dealer